yourhandyman.tradePost a job

Guide

How to hang a heavy mirror

Hang a heavy mirror safely by finding the weight, picking fixings to match the wall and using two fixing points. Plain steps for DIY and when to ask a handyman.

Gloved hands holding a spirit level against a wall

Check the weight and the wall

Start with the weight of the mirror, which is often on the label or the packaging. If it is not, weigh it on bathroom scales. Heavy mirrors are risky if they fall, so do not guess.

Then find out what the wall is made of. Tap it: a hollow sound suggests plasterboard on a timber frame, and a solid sound suggests brick, block or plaster on masonry.

Pick the right fixings

On brick or block, use wall plugs with screws sized for the weight. On plasterboard, use fixings made for plasterboard, or screw into a timber stud found with a detector. Check the pack to see the load each fixing is rated for.

For a heavy mirror, choose fixings rated well above the mirror weight and use more than one.

Mark and fix

Hold the mirror up with a helper and mark the top edge lightly with a pencil. Check the type of fixing on the back: two D rings or a wire need two wall fixings, and French cleats need the wall batten fixed level.

Use a spirit level, drill the holes, check for pipes and cables with a detector first, and fit the plugs and screws.

Lift it into place

Always lift a heavy mirror with two people. Rest the weight on the fixings and stand back to check it is level.

Place a soft pad under the bottom edge while you check, in case anything slips. Do not hang a heavy mirror over a radiator or a hob.

When to ask a handyman

If the mirror is large, framed in heavy wood or hung over stairs, ask a handyman to fix it. They bring the right drills, detectors and fixings and can work from a stable stepladder.

A handyman can also fill and touch up old holes if you are moving a mirror from one place to another.

Common questions

How do I hang a heavy mirror on plasterboard?

Fix into a timber stud where you can, or use fixings made for plasterboard with a rated load well above the mirror weight. Use two fixing points. If you are unsure, ask a handyman.

Is it better to lean a heavy mirror than hang it?

Leaning a large mirror against a wall avoids drilling, but it can still tip. Use a safety strap or fixing at the top if there are children or pets in the house.

Do I need two people to hang a mirror?

Yes, for a heavy mirror. One person holds it while the other checks level and marks the fixing points. Never lift a heavy mirror alone.

Where to go from here

Read next

Find a handyman near you