Guide
How to fill holes in walls
Fill small holes with ready mixed filler, sand and paint. Plain steps for nail holes, wall plug holes and larger dents, and when to ask for plaster repair.

Choose the right filler
For small nail and screw holes, ready mixed filler is simple to use. For larger holes, use a filler made for deeper repairs, or a patch for plasterboard.
Check the label: some fillers are for interior use only, and some are for wood or for outside walls.
Prepare the hole
Brush away loose bits and dust. If the edges are crumbling, scrape them back to firm material.
For deeper holes, damp the surface lightly if the filler instructions say so, so the filler grips.
Apply the filler
Press the filler in with a flexible filling knife, drawing it across the hole to leave a flat surface. Leave it slightly proud, as it shrinks as it dries.
For a deep hole, fill in layers and let each dry before adding the next.
Sand and paint
When dry, sand lightly with fine sandpaper until the surface is flush with the wall. Wipe off the dust.
Paint a primer or mist coat over the patch first, otherwise the filler can show through the finish coat. Then paint the wall.
When to ask for plaster repair
Large holes, cracks that keep returning, or damp or crumbling plaster call for more than filler. A handyman can patch plaster, but damp or movement in the wall needs the cause found first.
If the plaster is wet or stained, find the source of the water before you repair the surface.
Common questions
Which filler should I use for holes in walls?
It depends on the size. Ready mixed filler suits small holes, and a deeper repair filler suits larger ones. Read the label for the surface and the depth it can fill.
Why does filler show through the paint?
Filler absorbs paint differently from the wall. Apply a primer or a mist coat over the patch before the finish coat so the colour is even.
Can a handyman repair a large hole in plasterboard?
Yes. Larger holes need a plasterboard patch or plaster repair. A handyman can do small patches, and a plasterer is better for large areas or whole walls.