yourhandyman.tradePost a job

Guide

How to fix a running toilet

A running toilet usually needs a float adjustment or a replacement valve. Follow plain steps to find the fault, fix it and know when to ask a handyman.

The dual flush button on a white toilet cistern

Why a toilet keeps running

A toilet that keeps running or refilling usually has a fault inside the cistern. The float may be set too high, the fill valve may be worn, or the flush valve seal may no longer close.

A hissing or trickling noise, or water running into the bowl, tells you something is not sealing.

Look inside the cistern

Lift off the lid and look. Flush and watch what happens: the water should fill to the line and the fill valve should shut off.

If water keeps flowing in, the fill valve or float is the problem. If water keeps leaking into the bowl, the flush valve seal is the likely cause.

Adjust the float

Many fill valves have a float you can adjust with a screw or a clip. Lower the float slightly so the valve shuts off before the water reaches the overflow.

Flush and check. If the water stops at the right level, the job is done.

Replace the valve or seal

If adjusting does not help, turn off the water at the isolating valve, drain the cistern and replace the fill valve or the flush valve seal. Take the old part to a plumbers merchant to match it.

Fit the replacement part, turn the water on slowly and check for leaks.

When to ask a handyman

Replacing a fill valve, a flush valve or a toilet seat is normally handyman work. If water is leaking from the base of the toilet or from the pipes, or the isolating valve will not close, a plumber may be needed.

A handyman can also look at nearby jobs on the same visit, such as a dripping tap or a loose toilet seat.

Common questions

Why does my toilet keep refilling?

A worn flush valve seal can let water leak from the cistern into the bowl, and the fill valve opens to top it up. Replacing the seal usually stops it.

Can I fix a running toilet without a plumber?

Often yes. Adjusting the float or replacing a fill valve are common DIY jobs. If you are unsure, ask a handyman.

Do I need to turn off the water first?

Yes. Turn off the isolating valve on the pipe to the cistern before you take parts out, then flush to empty the cistern.

Where to go from here

Read next

Find a handyman near you