Guide
How to fix a dripping tap
Most dripping taps need a replacement washer or cartridge. Follow the plain steps to turn off the water, strip the tap and refit it, or ask a handyman.

Why taps drip
A dripping tap is usually a worn washer, a worn cartridge or a damaged seat inside the tap. Water keeps escaping because the seal no longer closes properly.
The type of tap decides the fix: a traditional tap with a separate handle usually has a rubber washer, and a modern mixer or quarter turn tap often has a ceramic disc or cartridge.
Turn off the water
Find the isolating valve on the pipe under the sink and turn it off with a screwdriver. If there is no valve, turn off the main stopcock.
Open the tap to let any water drain, and put the plug in the sink so small parts do not fall down the plughole.
Take the tap apart
Remove any cover or cap, undo the screw and lift off the handle. Use a spanner to undo the retaining nut and lift out the inner part.
Take a photo at each stage. Take the washer or cartridge to a plumbers merchant so you can match it exactly.
Refit and test
Fit the replacement washer or cartridge, replace the parts in reverse order and tighten gently. Do not overtighten.
Turn the water back on slowly and check the tap and the valve for leaks. If it still drips, the seat inside the tap may be worn and the whole tap may need replacing.
When to ask a handyman
A handyman can replace a washer, a cartridge or a whole tap. Tell them the type of tap and, if you can, send a photo.
If water is leaking from pipework, or the isolating valve will not close, a plumber may be needed. A boiler or any other gas appliance needs a Gas Safe registered engineer.
Common questions
Why is my tap still dripping after I changed the washer?
The seat inside the tap may be worn, or the washer may be the wrong size. Check that the replacement washer is an exact match, and consider replacing the tap if the seat is damaged.
Do I need to turn off the water to fix a tap?
Yes. Use the isolating valve under the sink or turn off the main stopcock, then open the tap to drain the pipe before you start.
Can a handyman replace a whole tap?
Yes, replacing a tap with a like for like tap is routine handyman work. Changing the pipework or moving the sink is plumbing work that may need a plumber.