yourhandyman.tradePost a job

Guide

Can a handyman do electrical work?

A handyman can do simple like for like electrical swaps, but not circuits, fuse boxes or gas work. See what needs an electrician or a Gas Safe engineer.

A flat screen TV mounted on a white wall above a wooden console

The short answer

It depends on the job. Small like for like swaps are normally fine, but circuits, consumer units (fuse boxes) and anything involving gas must go to a registered specialist.

A handyman should be clear about this. If someone offers to do gas work or a circuit installation without the right registration, that is a reason to say no.

Electrical jobs a handyman may do

The Planning Portal says most repairs, replacements and maintenance jobs are not notifiable in England, and neither is adding sockets or lights to existing circuits outside bath and shower areas. In practice this covers swapping a light fitting or a socket faceplate for a like for like replacement.

It still has to be done safely. Switch off the circuit at the consumer unit first and make sure the power is off before touching any wiring.

Electrical jobs that need a registered electrician

The Planning Portal lists the following as notifiable in England: installing a consumer unit, installing a complete circuit, and altering existing circuits in special locations, which are the spaces around baths and showers. A registered competent person can self-certify this work.

Otherwise a building control body or a registered third party certifier must be notified before the work starts. Ask for the certificate when the job is done.

Plumbing and gas

Simple plumbing such as changing a tap washer, fitting a toilet seat or replacing a flush valve is routine handyman work. Anything involving gas is different: the Health and Safety Executive (HSE) says that in England, Scotland and Wales anyone employed to work on gas appliances in domestic premises must be a Gas Safe registered engineer.

That covers boilers, gas fires and gas hobs. Check the engineer's Gas Safe ID card, which shows what they are qualified to work on.

How to check before you book

Tell the handyman exactly what you want done. Ask whether it is something they do themselves or pass to a registered electrician or Gas Safe engineer.

If you are unsure, ask for the job to be split: the handyman fits the shelves and curtain poles, and the specialist does the wiring or gas work.

Worth knowing

England

The Planning Portal says that in England, installing a consumer unit, installing a complete circuit and altering existing circuits in special locations (the spaces around baths and showers) is notifiable. A registered competent person can self-certify the work, otherwise a building control body or registered third party certifier must be notified before work starts. It adds that most repairs, replacements and maintenance jobs are not notifiable.

Planning Portal, Electrics: building regulations, planningportal.co.uk/permission/common-projects/electrics/building-regulations

England

The Planning Portal says adding sockets or lights to existing circuits outside bath and shower areas is not notifiable in England. It says this work should still follow the BS 7671 wiring regulations, and recommends that a qualified electrician issue a Minor Works Certificate for it.

Planning Portal, Electrics: building regulations, planningportal.co.uk/permission/common-projects/electrics/building-regulations

Common questions

Can a handyman fit an extra socket?

Adding a socket to an existing circuit outside bath and shower areas is not notifiable in England, according to the Planning Portal. It should still meet the wiring regulations, so many people ask a qualified electrician to do it and issue a certificate.

Can a handyman change a boiler or fit a gas hob?

No. In England, Scotland and Wales, the Health and Safety Executive (HSE) says anyone employed to work on gas appliances in domestic premises must be a Gas Safe registered engineer. Ask to see their ID card and check the register.

Is a certificate needed for electrical work?

For notifiable work, yes: a registered competent person can self-certify, or building control must be involved. For smaller jobs, the Planning Portal recommends that a qualified electrician issue a Minor Works Certificate.

Where to go from here

Read next

Find a handyman near you