yourhandyman.tradePost a job

Repairs around the home

Boxing in pipes

£38 to £76 is the price of pre-formed casing for boiler pipes, and £180 to £300 is a typical day rate for a joiner or carpenter. A boxing-in job varies with the length of pipe. The materials alone cost £10 to £25 per metre for simple boxing.

Post your handyman job to Premium membersTell us about your job once. Premium handymen who cover your area can then contact you.Describe your job

Exposed pipes running along a white wall above the floor

What this covers

What it costs. Boxing in pipes is priced by the length of the run. Full cost breakdown.

What the job covers

  • Boxing in pipes with timber and board
  • Fitting pre-formed pipe casing
  • Fitting an access panel
  • Boxing in a waste pipe
  • Finishing the box ready for paint

Worth knowing

Great Britain

In England, Scotland and Wales, the Health and Safety Executive (HSE) says anyone employed to work on gas appliances in domestic premises must be a Gas Safe registered engineer, and competent in that area of gas work. It says the engineer's competencies are shown on the back of their Gas Safe Register ID card, and that you can check them on the Gas Safe Register website or by phone.

HSE, Gas safety: home owners and occupiers FAQs, hse.gov.uk/gas/domestic/faqownerocc.htm

What is involved

Boxing in pipes means covering exposed pipework with a neat enclosure. It is often done in kitchens, bathrooms and utility rooms, where pipes run up a wall or across a corner, or around a boiler. Many homeowners do it to tidy the look of a room and make it easier to paint and clean.

A handyman measures the run, builds a simple frame from timber battens, covers it with board, and finishes the joins ready for paint. Pre-formed casing is a simpler option for pipes under a boiler, and one cost guide says it is often simple enough for DIY. The most important point is access. A boxed-in stopcock, valve or joint needs an access panel so it can be reached if something leaks. Pipes should not be fixed in a way that traps leaks or hides a valve. Moving pipework is plumber's work, and Boxing in pipes near a boiler does not involve the boiler itself, but ask a Gas Safe registered engineer first if you are unsure.

The price depends on the length and height of the run, the materials, the number of corners and the finish. Access panels, painting, tiling and waste removal are common extras. A small run costs less than a full-height enclosure or a bathroom job with tiling. Ask the handyman where the access panels will be and how they will be fixed. Keep a photograph of the pipes before the boxing goes on, so that you know where everything is.

Exposed pipes running along a white wall above the floor

Boxing in pipes with timber and board, one of the jobs a handyman is hired for.

Choosing someone for the job

Ask where access panels will go and which valves and joints they will cover. Ask what the box is made from and how it will be finished. Ask whether painting is included. Ask for a written quote showing the length of the run and the materials.

Related jobs:

Common questions

Is it safe to box in pipes?

Pipes can be boxed in as long as valves, joints and stopcocks stay reachable through an access panel. Do not box in anything that needs to be seen or serviced. Ask the handyman to explain where the panels will go.

Can I use pre-formed casing?

Yes, for simple runs such as boiler pipes. One cost guide says casing is often simple enough for DIY and puts it at £38 to £76, supply only. A handyman can fit it neatly.

What material is used for boxing in pipes?

Usually timber battens and a board such as MDF or plasterboard, painted afterwards. Moisture-resistant board is often used in bathrooms. A handyman can recommend what suits the room.

Can a handyman move my pipes?

Moving or changing pipework is plumber's work, and gas pipework is for a Gas Safe registered engineer. A handyman boxes in the pipes where they are. Tell the handyman if you want the pipes moved.

Does the price include painting?

Not always. Painting, tiling and filling are often separate lines. Ask whether the box will be left ready for paint.

Find someone near you