yourhandyman.tradePost a job

Guide

How to hang a door

Hang a door by marking the hinges, cutting the recesses, fitting the hinges and checking the gaps. Plain steps for an internal door and when to ask a handyman.

A hinge being screwed to a door with a screwdriver

What you need

You need a door that fits the frame, three hinges, a drill, a chisel, a hammer, a pencil, a tape measure and a level. Check the size of the opening before buying the door.

Internal doors often need trimming to fit. Cut and plane the door a little at a time and keep the same gap round the edges.

Check the fit

Hold the door in the frame with wedges under it and look at the gaps. Mark the sides that need trimming and plane or saw them carefully.

Leave a small, even gap round the door, with a larger gap under it so it clears the floor and carpet.

Mark and cut the hinge recesses

Mark the hinge positions on the door and on the frame, using the same distance from the top and bottom edges. Cut the recesses with a chisel to the depth of the hinge so it sits flush.

Fit the hinges to the door first, then offer the door to the frame and fix the hinges to the frame.

Fit the handle and latch

Mark and drill for the latch, fit the latch and handle, and mark the keep on the frame. Check the latch catches without the door rattling.

Open and close the door a few times. If it rubs, check which edge is catching and plane a little off.

When to ask a handyman

Hanging a door is a standard handyman job. It saves time because they bring the tools and know how to trim a door without spoiling it.

If the frame is out of square or damaged, tell the handyman beforehand. If a door is a fire door, ask whether it needs particular fittings.

Common questions

How long does it take to fit a door?

It depends on the door and the frame. Fitting a plain internal door takes longer if it needs trimming, so ask the handyman for a time estimate for your doors.

Can I hang a door on my own?

It is possible, but a second person helps to hold the door while you fix the hinges. A heavy door can be awkward and unsafe alone.

Why is my door sticking after fitting?

The door may need more trimming, or a hinge may be set too deep or too shallow. Check where it rubs and adjust the hinge recess or plane the edge.

Where to go from here

Read next

Find a handyman near you